Store
Browse through our store. When you are ready to order, use our order form.SUNDRIES
To Order, use our ORDER FORM
1 quart, MIX & MEASURE
$2.50
This mixing bucket is used to mix and measure epoxy and pigments. Holds 1 quart. Printed with easy to read measurements.
5 quart, MIX & MEASURE
$3.00
This mixing bucket is used to mix and measure epoxy and pigments. Holds 5 quarts. Printed with easy to read measurements.
9″x3/8″ NAP, ROLLER COVER, LINT-LESS, WITH END CAPS
$10.00
18” X 3/8”, DRIPLESS/LINTLESS ROLLER COVER
$15.00
CHIP BRUSH (2”) – single
$2.50
This 2 inch chip brush is used for “cutting in” epoxy into hard to reach areas. Disposable
TOOLS
To Order, use our ORDER FORM
ROLLER FRAME – ADJUSTABLE (12” – 18”)
$23.00
This Roller Frame is used for the rolling over epoxy. It is adjustable from 12 inches, up to 18 inches. Use this roller with our Roller Frame:
MAGIC TROWELS 12″/18″/22″
$33.00-$37.00
Magic trowels, also know as squeegees, come in 3 sizes: 12 inch, 18 inch, and 22 inch. They are used to apply the expoy to the floor. For any size floor, Midwest Slip On Spike Shoes are necessary.
MIDWEST SLIP ON SPIKE SHOES
$110.00
Spiked Shoes for concrete finishing.
- Comfortable, light weight
- Patented, hands-free design
- Perfect for self-leveling coatings
- Slips on over boots or shoes
WOLFPACK EQUIPMENT
To Order, use our ORDER FORM
7″ Edge Grinder w/ Frame
$1,599.00
The 7” Edge Grinder with Frame is an affordable edge solution for smaller surface prep jobs. It is designed to operate while standing, avoiding wear on your knees and back.
– 7” Bosch grinder on frame
– 7” dust shroud
– 110V
– LED light
– Weighs 46 lbs
10″ WOLF PACK EDGER
$1,799.95
10” rotary brush with risers, or 9” pads with pad driver. Ample power in a small and manageable machine. Excellent balance with low center of gravity. It’s ideal for use in tight spaces, restrooms, edging and stairs.
1.0 HP, Dual capacitor, AC motor, 115-230V , 50/60 Hz power, Triple-planetary severe-duty 11:1 helical-cut industrial gears. Gears drive brushes and pads at 165 RPM, Thumb-operated safety switch. Dual steel operating triggers 1” x 5” non-marking ball bearing wheels.
10″ Omega
$2,499.00
The OMEGA 10” Grinder is ideal for working in tight, small spaces. Utilizes 3 pieces of standard WOLF Trap tooling. Equipped with an port for dust free grinding. Folds down for easy transport. – Width 10” – Single Head – 110V – 6500 RPM – Weighs 65 lbs – Single Phase -Motor 2.5 HP – Removable shroud for edge grinding
OMEGA 10″ Grinder Manual
17″ Nomad
$3,999.00
The 17″ Nomad is the perfect grinder or scrubber for anyone in the industry. With a 17″ path, it can be used efficiently in confined spaces as well as tackling large jobs just as easy. Although light weight and easy to transport, this grinder is incredibly strong and durable.
-Motor 1.5 HP, 180 frame TEFC dual capacitor AC
– Width 17”
– 2 Head
– 115-230V
– Weighs 133 lbs
– Optional 50 lb. weight set with transport lock.
17″ Nomad Grinder Manual
20″ Warrior
$4,899.00
The WARRIOR 20″ Grinder is the best quality and lowest cost floor grinder on the market. The WARRIOR is built for edging, grinding, and polishing concrete floors. It has variable speeds, an adjustable handle and adjustable head pressure.
– Width 20”
– 2 Head
– 220V/240V
– Single Phase
– Motor 7.5 HP(5.5kw)
– 1 additional 44 lb weight
– Inverter 7.5 HP(5.5kw)
– 8 Gal water tank
– 50/60 HZ
– 15 AMPS
-300-1500 RPM
– Weighs 330lbs
Warrior 20″ Manual
25″ Delta
$8,850.00
The DELTA 25” Grinder is ideal for both opened AND confined spaces. Built for low maintenance, the DELTA’s sleek, ergonomic design is perfectly balanced. Equipped with a durable, floating stainless dust shroud, and 3 flexible grinding heads. The locking adjustment handle means no pins to lose. The DELTA is operator friendly due to the easy to use control panel, built in tool box with tool kit, and 2 USB charging ports. Connects to Vac 3 for dustless operation.
Working Width: 25″
Heads: 3
Volts: 220
Horsepower: 10
Water tank: 7 Gallons
Inverter: 300-1800 RPM
Phase: 1 or 3
Weight: 681 lbs.
Grinding Pressure: 456 lbs.
Amp Max: 45
27″ Beta
$9,999.00
The BETA 27” Grinder is ideal for both opened AND confined spaces. Built for low maintenance, the BETA’s sleek, ergonomic design is perfectly balanced. Equipped with a durable, floating stainless dust shroud, and 3 flexible grinding heads. The locking adjustment handle means no pins to lose. The BETA is operator friendly due to the touch screen control panel, built in tool box with tool kit, and 2 USB charging ports. Connects to Vac 3 for dustless operation.
Working Width: 27″
Heads: 3
Volts: 220
Horse Power: 10
Water Tank: 7 Gallons
Inverter: 300-1800 RPM
Phase: 1 or 3
Weight: 720 lbs.
Grinding Pressure: 523 lbs.
Amp Max: 45
BETA 27” Grinder Manual
30″ Alpha
$12,999.00
The ALPHA 30” Grinder is ideal for both opened AND confined spaces. Built for low maintenance, the ALPHA’s sleek, ergonomic design s perfectly balanced. Equipped with a durable, floating stainless dust shroud, and 3 flexible grinding heads. The locking adjustment handle means no pins to lose. The ALPHA is operator friendly due to the easy to use control panel, built in tool box with tool kit, and 2 USB charging ports. Connects to Vac 3 for dustless operation.
Working Width: 30″
Heads: 3
Volts: 220
Horse Power: 10
Water Tank: 7 Gallons
Inverter: 300-1800 RPM
Phase: 1 or 3
Weight: TBD
Grinding Pressure: TBD
Amp Max: 45
ALPHA 30” Grinder Manual
Wolf Vac 3
$2,899.95
The WOLF VAC 3 is equipped with a manual lever that will clean the filter with a jet pulse. It includes floor cleaning tools and comes standard with a HEPA filter. There are no circuit boards, which provide simple operation settings and a collapsible frame for easy transport.
– 110V
– 3 Motors
– Weighs 176 lbs
-Jet Pulse Filter cleaning
– Includes wand, brush head and HEPA filter
– 330 CFM
– 26 Foot Hose
WOLF VAC 3 Manual
Wolf Vac 3S w/ Separator 110V
$3,899.95
The WOLF VAC 3S is equipped with a manual lever that will clean the filter with a jet pulse. It includes floor cleaning tools and comes standard with a HEPA filter. There are no circuit boards, which provide simple operation settings and a collapsible frame for easy transport. The separator keeps the dust out of your vac and filter to allow for more effecient work.
– 110V
– 3 Motors
– Weighs 176 lbs
-Jet Pulse Filter cleaning
– Includes wand, brush head and HEPA filter
– 330 CFM
– 26 Foot Hose
WOLF VAC 3S Manual