Store

Browse through our store. When you are ready to order, use our order form.

EPOXY

To Order, use our ORDER FORM

PE-100 CLEAR (3 gallon kit)

$185.00

PE-100 is a solvent-less, two component epoxy coating system. It exhibits very good appearance and chemical and physical properties.

 

Documentation

Technical Data Sheets (TDS) PE-100-TDS_en

Safety Data Sheets (SDS) PE-100-A-SDS_en

Safety Data Sheets (SDS) PE-100-B-SDS_en

PE-100 LVX CLEAR (3 gallon kit)

$185.00

PE-100 LVX is a solvent-less, two component epoxy coating system, low viscosity creating vibrant color and high gloss finish. It exhibits very good appearance and chemical and physical properties.

Documentation

PE-100 SOLID GREY (3 gallon kit)

$195.00

PE-100 is a solvent-less, two component epoxy coating system. It exhibits very good appearance and chemical and physical properties.

Documentation

Technical Data Sheets (TDS) PE-100-TDS_en

Safety Data Sheets (SDS) PE-100-A-SDS_en

Safety Data Sheets (SDS) PE-100-B-SDS_en

PE-100 VRM SOLID VAPOR REDUCTION

(3 gallon kit)

$235.00

PUR-VRM is a 100% solid, two part epoxy coating, designed to control the moisture vapor emission rate on deteriorated or new concrete floors. At a thickness of 18 mils, it meets ASTM F3010 product requirements for vapor permeance. The coating controls moisture vapor emission rates up to 25 lb., for 24 hours, at 1000 square feet. PUR-VRM provides scratch and chemical resistance. It is durable, performs well, and enhances the aesthetics of any concrete floor. This system has been approved by the Canadian Food Inspection Agency (CFIA). It meets LEED standards.

Documentation

Technical Data Sheet: PUR VRM

PE DEEP CASTING (3 gallon kit)

$295.00

PE DEEP CASTING is a 100% solid, two component epoxy casting system. It is used for mass castings with thicknesses greater than 1 inch. PE DEEP CASTING is designed for casting, potting and embedding applications. The low color and low viscosity allow for bubble free, crystal clear castings ideal for art and hobby applications. It is formulated for a long gel time, with lowexothermic heat buildup. PE DEEP CASTING has a low VOC content, for user safety and reduced environmental impact.

Documentation

Technical Data Sheets (TDS)
PE-DEEP-CASTING_TDS_en

Safety Data Sheets (SDS)
PE-DEEP-CASTING-A-SDS_en

Safety Data Sheets (SDS)
PE-DEEP-CASTING-B-SDS_en

POLYASPARTIC

To Order, use our ORDER FORM

PP-HFAST FAST CURE (3 gallon kit)

$235.00

PP-HFAST is a two-component, 85% solid, rapid curing, hybrid polyaspartic coating system designed as a decorative yet durable coating for commercial and industrial flooring. Formulated with aliphatic chemistry, PP-HFAST is color stable allowing it to take UV exposure without color shifts seen with other coating systems such as epoxies. PP-HFAST is a 1:1 mix ratio system with sufficient pot life to be rolled, brushed, or sprayed . It has a robust application window with ability to apply at low temperatures and high humidity.

Documentation

Technical Data Sheets (TDS)
PP-HFAST-TDS_en

Safety Data Sheets (SDS)
PP-HFAST-A-SDS_en

Safety Data Sheets (SDS)
PP-HFAST-B-SDS_en

PP-S85 SLOW CURE (3 gallon kit)

$235.00

PP-S85 is a two-component, slow curing, no odor, hybrid polyaspartic coating system designed as a decorative yet durable coating for commercial and industrial flooring. Formulated with aliphatic chemistry, PP-S85 is color stable allowing it to take UV exposure without color shifts seen with other coating systems such as epoxies. PP-S85 is a 1:1 mix ratio system with sufficient pot life to be rolled, brushed, or sprayed . It has a robust application window with ability to apply at low temperatures and high humidity.

Documentation

Technical Data Sheets (TDS)
PP-S85-TDS_en

Safety Data Sheets (SDS)
PP-S85-A-SDS_en

Safety Data Sheets (SDS)
PP-S85-B-SDS_en

URETHANE

To Order, use our ORDER FORM

EZ HD URETHANE CLEAR (1 gallon kit) GLOSSY/MATTE

$270.00

EZ HD Urethane Clear sealer provides a barrier to protect wood, concrete and other items from heat, excessive cold and moisture.  This kit comes in 1 gallon, gloss or matte finish.

EZ Water-Based URETHANE GLOSS/MATTE

(1 gallon kit)

$130.00

This Urethane is Water-based and provides a clear finish and has low odor. It’s most durable on hardwood floors. Water based urethane offers good protection; the biggest difference being appearance.  If you enjoy the natural look of maple, apply this Water Base Urethane.

URETHANE CLEAR TOPCOAT (3 gallon kit)

$335.00

Urethane Clear Topcoat paint is the most durable auto paint, and is chip-resistant.  A coat of urethane paint will outlast most acrylic paints, when properly maintained.  If needed, it is possible to wet-sand urethane before applying a clear coat.

POLYUREA

To Order, use our ORDER FORM

Polyurea Crack Filler

PP-CF Polyurea CRACK FILLER (2 gallon kit)

$250.00

PP-CF is a two parts, high penetration, fast setting, hybrid polyurea for repairing and re-building damaged concrete. The product is a 1:1 ratio, easy to mix system that is 98 % solids and VOC compliant. The PP-CF can be used to set anchor bolts, repair damaged control joints, fill spalling, and rebuild vertical curbing and steps. Sand or gravel can be added to extend the volume of the material and acts as filler for repairing large spalls, holes and cracks.

Documentation

Technical Data Sheets (TDS) PP-CF-TDS_en Safety Data Sheets (SDS) PP-CF-A-SDS_en Safety Data Sheets (SDS) PP-CF-B-SDS_en

COLOR FLAKE

To Order, use our ORDER FORM

Color Flakes 1/4” DOMINO (25 lbs.)

$100.00

These Color Flakes, also known as a decorative vinyl color chips, come in 1/4″ sized for a consistent broadcast. These flakes are unique, random shaped, sized within a standardized range and custom blended to match any décor.

Please note: Coverage varies depending on customer preference and application techniques.