PP-CF Polyurea CRACK FILLER (2 gallon kit)

$250.00

PP-CF is a two parts, high penetration, fast setting, hybrid polyurea for repairing and re-building damaged concrete. The product is a 1:1 ratio, easy to mix system that is 98 % solids and VOC compliant. The PP-CF can be used to set anchor bolts, repair damaged control joints, fill spalling, and rebuild vertical curbing and steps. Sand or gravel can be added to extend the volume of the material and acts as filler for repairing large spalls, holes and cracks.

Category:

Description

ADVANTAGES

  • Application temperature between 23°F to 100.4°F (-5°C to 38°C)
  • Product cures in 10 minutes @ 71.6°F (22°C) with excellent adhesion
  • Self-leveling and self-priming
  • Ready to service in 10 to 20 minutes
  • Easy to mix 1:1 ratio by volume
  • Highly chemical resistant
  • Excellent for industrial floor repairs subject to forklift traffic and harsh conditions

WHERE TO USE

  • Commercial freezer repairs
  • Aircraft hangar floors
  • Low temperature equipment
  • Maintenance facility floors
  • Garage floors
  • Industrial shop floors
  • Car washes or wash bays
  • Forming/ rebuilding stairs and steps
  • Leveling and grade matching
  • Bridge/ street repairs
  • Concrete polishing and other coating applications
  • Non-moving control joint fill

TECHNICAL DATA

IMPORTANT NOTE: PROPERTIES @ 73°F (23 °C) and 50% R.H. Times are approximate and will be affected by changing ambient conditions, especially changes in temperature and relative humidity. The indicated mileage is calculated for flat surfaces. A porous or imperfect surface will require more material in order to cover the same mileage. *

PACKAGING 2 US gal kit (7.57 L)
COLOR PART A: Black PART B: Amber MIX (liquid/cured): Black/Grey
SHELF LIFE 12 months in original unopened factory sealed containers. Store in dry cool place between 50 and 89°F (10 and 32°C). Keep out of direct sunlight and away from fire hazards.
MIX RATIO, BY VOLUME A:B = 1:1
MIX RATIO, BY WEIGHT A:B = 100:118
POT LIFE 3.5 OZ (100 G) 2-3 minutes @ 77°F (25°C)
CURE TIME 10-15 minutes @ 71.6°F (22°C)
DENSITY (KG/L) PART A: 0.94 PART B: 1.12 MIX: 1.11
DRYING TIMES (RELATIVE HUMIDITY 72°F (22°C) – 54%) Hard Dry: 5-10 minutes Foot Traffic: 10 minutes Vehicle Traffic: 30 minutes
TENSILE STRENGTH (PSI), ASTM D638 4500-4800
ELONGATION (%), ASTM D638 6-8%
BOND STRENGTH (PSI), ASTM D4541 1900-2300
COMPRESSIVE STRENGTH (PSI) LIQUID, ASTM C109 5600
HARDNESS (SHORE D), ASTM D2240 68-72
VISCOSITY (CPS) @ 77°F (25°C) PART A: 15-30 PART B: 15-30 MIX: 15-30

Documentation

Technical Data Sheets (TDS) PP-CF-TDS_en Safety Data Sheets (SDS) PP-CF-A-SDS_en Safety Data Sheets (SDS) PP-CF-B-SDS_en

Additional information

Weight 16.4 lbs

Reviews

There are no reviews yet.

Be the first to review “PP-CF Polyurea CRACK FILLER (2 gallon kit)”

Your email address will not be published. Required fields are marked *