PE-MF100 Epoxy waterproofing membrane

$240.00

PE-MF-100 is a 100% solids, two component, epoxy urethane hybrid, coating membrane. It is designed to be used as seamless waterproof membrane to protect concrete from water damage. It also offers excellent chemical resistance and protects against common parking deck chemicals. It is skid resistant and offers excellent durability and abrasion resistance. It exhibits very good mechanical properties, such as high elongation and tear resistance.

Out of stock

Category:

ADVANTAGES

  • Dense surface resistant to bacteria and moisture and easy to clean
  • May apply several layers on itself
  • Contains 100% solids and is VOC compliant, allowing for interior application without harmful odors
  • Excellent adhesive properties, allowing application on other firm and hard coating, as well as a good bond to the substrate
  • Superior flexibility
  • It is non-flammable and solvent free

WHERE TO USE

  • Parking garages
  • Mechanical rooms
  • Stadiums
  • Balconies
  • Plaza decks

TECHNICAL DATA

IMPORTANT NOTE: PROPERTIES @ 73°F (23 °C) and 50% R.H. Times are approximate and will be affected by changing ambient conditions, especially changes in temperature and relative humidity. The indicated mileage is calculated for flat surfaces. A porous or imperfect surface will require more material in order to cover the same mileage. *

PACKAGING 3.96 US GAL KIT (15 L)
COLOR PART A: UPON REQUEST
PART B: AMBER
MIX: UPON REQUEST
RECOMMENDED THICKNESS 20 MILS (80 ft²/gal)
SHELF LIFE 12 months in original unopened factory sealed containers. Keep away from extreme cold, heat, or moisture. Keep out of direct sunlight and away from fire hazards.
MIX RATIO, BY VOLUME A:B = 2:1
MIX RATIO, BY WEIGHT A:B = 100:44
POT LIFE 16 OZ (454 G) 30-45 minutes @ 77°F (25°C)
SOLIDS CONTENT, BY VOLUME 100%
SOLIDS CONTENT, BY WEIGHT 100%
DENSITY (KG/L) Part A: 1.10-1.15
Part B: 0.9-1.0
Mix: –
THINNER RECOMMENDED Xylene
WAITING TIME/ OVERCOATABILITY 8-12 hours
PEDESTRIAN TRAFFIC 12-24 hours
NORMAL TRAFFIC > 4 days
HEAVY EQUIPMENT TRAFFIC > 10 days
BOND RESISTANCE (PSI), ASTM D4541 5 days dry cure, 782 psi
WATER ABSORPTION (%), ASTM D570 0.6
HARDNESS (SHORE D), ASTM D2240 85-95
ABRASIVE RESISTANCE, ASTM D4060 ( CS17 / 1000 CYCLES / 1000 G) 0.10 g
VOC (G/L) Part A: 26.4 Part B: 146.8 Mix: –
VISCOSITY @ 77°F (25°C) Part A: 4000 – 6000 Part B: 300 – 500 Mix: 2000 – 3000
TRACTION STRENGHT (PSI), ASTM D638 569
ELONGATION %, ASTM D638 300 – 400 %

Technical Data Sheets (TDS)
PE-MF100-TDS_en

Safety Data Sheets (SDS)
PE-MF100-A-SDS_en

Safety Data Sheets (SDS)
PE-MF100-B-SDS_en

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.