PE DEEP CASTING (3 gallon kit)

$295.00

PE DEEP CASTING is a 100% solid, two component epoxy casting system. It is used for mass castings with thicknesses greater than 1 inch. PE DEEP CASTING is designed for casting, potting and embedding applications. The low color and low viscosity allow for bubble free, crystal clear castings ideal for art and hobby applications. It is formulated for a long gel time, with lowexothermic heat buildup. PE DEEP CASTING has a low VOC content, for user safety and reduced environmental impact.

Category:

ADVANTAGES

  • 100 % solids, low VOC content and low odor
  • Crystal clear and high gloss appearance
  • Magnifies object appearance
  • Dense surface resistant to bacteria and moisture
  • Excellent air release qualities
  • Will not distort with age

WHERE TO USE

  • Embedding and encapsulation
  • Resin jewelry
  • Resin castings
  • Bar top or table top epoxy
  • Molding resin
  • Art or crafting resin
  • High build coatings
  • Mass castings

TECHNICAL DATA

IMPORTANT NOTE: PROPERTIES @ 73°F (23 °C) and 50% R.H. Times are approximate and will be affected by changing ambient conditions, especially changes in temperature and relative humidity. The indicated mileage is calculated for flat surfaces. A porous or imperfect surface will require more material in order to cover the same mileage. *

PACKAGING 3 US gal (11.35 L) or 15 US gal (56.7 L)
COLOR Clear
MIX RATIO, BY VOLUME 2:1 (RESIN: HARDENER)
MIX RATIO, BY WEIGHT 100:45 (RESIN: HARDENER)
MIXED VISCOSITY @ 77°F (25°C) 500 CPS
POT LIFE 360 minutes (6 hours) @ 77°F (25°C)
TACK-FREE TIME @ 77°F (25°C) 84 HOURS
IDEAL WORKING TEMPERATURE RANGE OPTIMAL 61 – 81°F (16 – 27°C)
MAXIMUM CASTABLE AMOUNTS @ 77°F (25°C) 110 oz (3 kg or 3 Liters)
PEAK EXOTHERM 100°F (38°C)
RECOMMENDED FULL CURE 7 DAYS @ 77°F (25°C)
TENSILE STRENGTH 9500 PSI
ELONGATION 6.7%
FLEXURAL STRENGTH 15500 PSI
COMPRESSION STRENGTH 11700 PSI
TG ULTIMATE 203°F (95°C)
HARDNESS, SHORE D 70 – 80
VOC < 10 g/L

Documentation

Technical Data Sheets (TDS)
PE-DEEP-CASTING_TDS_en

Safety Data Sheets (SDS)
PE-DEEP-CASTING-A-SDS_en

Safety Data Sheets (SDS)
PE-DEEP-CASTING-B-SDS_en

Additional information

Weight 30 lbs

Reviews

There are no reviews yet.

Be the first to review “PE DEEP CASTING (3 gallon kit)”

Your email address will not be published. Required fields are marked *