PE-CREXT Extreme chemical resistant epoxy

$999.00

PE-CREXT is a high-built solvent less two components epoxy novalac coating system designed for severe service coating. It exhibits very good finish and chemical properties. It exhibits very good solvent and chemical resistance. It is suitable for use in direct exposure in manufacturing facilities, warehouses, laboratories, dairies, breweries, chemical plants, paper mills, food processing and pharmaceutical manufacturing.

Out of stock

Category:

ADVANTAGES

  • Dense surface, resistant to bacteria and moisture and easy to clean
  • May apply several layers on itself
  • Contains no solvent, allowing for interior application without harmful odors
  • Excellent adhesive properties, allowing application on other firm and hard coating, as well as a good bond to the substrate
  • Superior chemical and solvent resistance
  • Exceptional abrasion resistance

TECHNICAL DATA

IMPORTANT NOTE: PROPERTIES @ 73°F (23 °C) and 50% R.H. Times are approximate and will be affected by changing ambient conditions, especially changes in temperature and relative humidity. The indicated mileage is calculated for flat surfaces. A porous or imperfect surface will require more material in order to cover the same mileage. *

PACKAGING 3 US gal (11.35 L) OR 15 US GAL KIT (56.7 L)
RECOMMENDED THICKNESS Finish Coat: 16 MILS (100 ft²/gal)
SHELF LIFE 12 months in original unopened factory sealed containers. Keep away from extreme cold, heat, or moisture. Keep out of direct sunlight and away from fire hazards.
MIX RATIO, BY VOLUME A:B = 2:1
POT LIFE 30-40 minutes @ 77°F (25°C)
VOC (g/L) 320 g/L
THERMAL RESISTANCE – EXPOSURE DRY HEAT
THERMAL RESISTANCE – PERMANENT + 122°F (50°C)
THERMAL RESISTANCE – SHORT-TERM MAX. 7 DAYS + 176°F (80°C)
THERMAL RESISTANCE – SHORT-TERM MAX. 12 HOURS + 212°F (100°C)
Density (kg/L) Part A: 1.29-1.31 Part B: 0.9-1.0
THINNER RECOMMENDED Xylene
DRYING TIMES – Tack Free 4-6 hours
DRYING TIMES – FOOT TRAFFIC 24 hours
DRYING TIMES – FULL CURE 7 days @ 24°C / 50% RH
Bond Strength (psi), ASTM C882 (100 concrete failure) 2640
Water Absorption, ASTM D570 0.3 %
HARDNESS (SHORE D), ASTM D2240 80-85
Falling Sand Abrasion Resistance (L sand/ 1 dry mil), ASTM D968 40
VISCOSITY @ 77°F (25°C) A/B Mix: 3500-4000 cps
TENSILE STRENGTH (PSI), ASTM D638 5700 psi
COMPRESSIVE STRENGTH (PSI), ASTM D695 14200
ELONGATION (%), ASTM D638 3-4

Technical Data Sheets (TDS)
PE-CREXT-TDS_en

Safety Data Sheets (SDS)
PE-CREXT-A-SDS_en

Safety Data Sheets (SDS)
PE-CREXT-B-SDS_en

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.