PE-CR Chemical resistant epoxy

$999.00

PE-CR is a solvent-less, two component epoxy coating system. It exhibits very good appearance and chemical and physical properties. It has a VOC content of 37 g/L. It has very good solvent and chemical resistance.

Out of stock

Category:

ADVANTAGES

  • Dense surface resistant to bacteria and moisture and easy to clean
  • May apply several layers on itself
  • Contains no solvent allowing for interior application without harmful odors
  • Excellent adhesive properties allowing application on other firm and hard coatings as well as a good bond to
    the substrate
  • Superior chemical and solvent resistance can be used on damp and dry surfaces
  • Exceptional abrasion resistance

WHERE TO USE

  • Animal Shelters
  • Commercial kitchen
  • Pharmaceutical industry
  • Pulp & Paper
  • Pool
  • Garage
  • Bakeries
  • Breweries
  • Food & Brevage
  • Operating Rooms
  • Kitchens
  • Laboratories
  • Meat Processing
  • Commercial areas
  • Light industry
  • Heavy industry
  • Metal industry
  • Warehouses
  • Wastewater Treatment
  • Light Manufacturing
  • Balconies
  • Traffic Decks
  • Mechanical Rooms
  • Secondary containment
  • Pave stone
  • Chemical Processing
  • Dairies
  • Electronics…

TECHNICAL DATA

IMPORTANT NOTE: PROPERTIES @ 73°F (23 °C) and 50% R.H. Times are approximate and will be affected by changing ambient conditions, especially changes in temperature and relative humidity. The indicated mileage is calculated for flat surfaces. A porous or imperfect surface will require more material in order to cover the same mileage. *

PACKAGING 3 US gal (11.35 L) OR 15 US GAL KIT (56.7 L)
COLOR Upon Request
SHELF LIFE 12 months in original unopened factory sealed containers. Keep away from extreme cold, heat, or moisture. Keep out of direct sunlight and away from fire hazards.
Mix Ratio, by volume A:B = 2:1
Pot Life 50 minutes @ 50°F (10°C)
25 minutes @ 68°F (20°C)
15 minutes @ 86°F (30°C)
Density (kg/L) – CLEAR PART A: 1.05-1.10 PART B: 0.9-1.0
Density (kg/L) – COLOURS PART A: 1.10-1.15 PART B: 0.9-1.0
THINNER RECOMMENDED Xylene
WAITING TIME/ OVERCOATABILITY BEFORE APPLYING PE-CR OVER PRIMER + 50ºF (10ºC) MIN. 24h MAX. 3 days
+ 68ºF (20ºC) MIN. 12h MAX. 2 days
+ 86ºF (30ºC) MIN. 6h MAX. 1 days
WAITING TIME/ OVERCOATABILITY BEFORE APPLYING SECOND COAT OF PE-CR + 50ºF (10ºC) MIN. 30h MAX. 3 days
+ 68ºF (20ºC) MIN. 24h MAX. 2 days
+ 86ºF (30ºC) MIN. 16h MAX. 1 days
DRYING TIMES + 50ºF (10ºC) FOOT TRAFFIC: 30h LIGHT TRAFFIC: 5 days FULL CURE: 10 days
DRYING TIMES + 68ºF (20ºC) FOOT TRAFFIC: 24h LIGHT TRAFFIC: 3 days FULL CURE: 7 days
DRYING TIMES + 86ºF (30ºC) FOOT TRAFFIC: 16h LIGHT TRAFFIC: 2 days FULL CURE: 5 days
VOC (G/L) PART A: 46.4 g/L
PART B: 0 g/L
MIX: 36.9 g/L
BOND RESISTANCE (PSI), ASTM D4541 > 300 (substrate ruptures)
PERMEABILITY (%), ASTM D570 0.3%
HARDNESS (SHORE D), ASTM D2240 85-90
ABRASIVE RESISTANCE, ASTM D4060 ( CS17 / 1000 CYCLES / 1000 G) 0.10 g
VISCOSITY @ 77°F (25°C) – CLEAR PART A: 1300 – 1700
PART B: 900 – 1200
MIX: 1000 – 1400
VISCOSITY @ 77°F (25°C) – COLOURS PART A: 3000-4000
PART B: 900 – 1200
MIX: 1400-2000
TENSILE STRENGTH (PSI), ASTM D638 6500
COMPRESSIVE STRENGTH (PSI), ASTM D695 7800
ELONGATION (%), ASTM D638 6.7

Technical Data Sheets (TDS)
PE-CR-TDS_en

Safety Data Sheets (SDS)
PE-CR-A-SDS_en

Safety Data Sheets (SDS)
PE-CR-B-SDS_en

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.