P-AU100 Aliphatic urethane

$999.00

P-AU100 is a two-component, high solids, UV stable moisture-cure polyurea topcoat. It provides a high-gloss finish with superior chemical resistance. It exhibits excellent physical properties and is designed to withstand industrial traffic. It can be applied over an epoxy-primer or used to re-coat existing epoxy or urethane floor.

Out of stock

Category:

ADVANTAGES

  • Long pot life
  • Respectable odor
  • Superior chemical resistance (compared to standard epoxy)
  • Excellent chemical resistance
  • Light stable and good gloss retention
  • VOC complaint

WHERE TO USE

  • UV-stable top coat
  • Aircraft hangar floors
  • Production areas
  • Maintenance facilities
  • Warehouses

TECHNICAL DATA

IMPORTANT NOTE: PROPERTIES @ 73°F (23 °C) and 50% R.H. Times are approximate and will be affected by changing ambient conditions, especially changes in temperature and relative humidity. The indicated mileage is calculated for flat surfaces. A porous or imperfect surface will require more material in order to cover the same mileage. *

PACKAGING 1 US gal (4 L)
COVERAGE RATE 500 ft2/gallon
RECOMMENDED THICKNESS 3.2 wet mils (81 microns)
MIX RATIO, BY VOLUME A : B = 4 : 1
DENSITY (KG/L) Part A: 1.14
Part B:0.90
Mixed: 1.09
POT LIFE 60 minutes @ 77°F (25°C)
WORKING TIME 30 minutes
VOC 75.4 g/L

Technical Data Sheets (TDS)
P-AU100-TDS_en

Safety Data Sheets (SDS)
P-AU100-A-SDS_en

Safety Data Sheets (SDS)
P-AU100-B-SDS_en

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.